Universal SD/HD Audio/Video Frame Sync/Converter
(Auslieferung erfolgt ohne Netzteil - Dieses muß separat bestellt werden)
FS1 Features "Everything In, Everything Out" Architektur für HD und SD Video
Der FS1 ist ein universeller HD und SD Audio und Video Framesynchronisierer sowie Konverter. Durch einen flexiblen Aufbau kann der FS1 gleichtzeitig HD und SD Video in voller 10-Bit Broadcast_Qualität und 24-Bit Audio unterstützen. Der Konverter Up-oder-Down-Konvert zwischen SD und HD, und beherrscht die gleichzeite Ausgabe von beiden Formaten. Der FS1 beinhalet außerdem 10-Bit HD zu HD Cross-Conversion für 1080 und 720 Formate. Für Audio unterstützt der FS1 8-Kanal AES, analog oder embedded Audio mit voller Flexibilität. Der FS1 ist zudem netzwerkfähig.
Features
• Universal HD/SD Audio/Video Frame Synchronizer and Converter
• SD/HD up/down conversion
• SD/SD aspect ratio conversion
• HD/HD cross conversion (720p/1080i)
• Dual HD/SD SDI Inputs and Outputs
• Component Analog HD/SD Input and Output
• Composite/S Video Input and Output with TBC
• 8 Channel AES and Balanced Analog Audio inputs and outputs
• 8 Channel Embedded Audio I/O - Fully Redundant Power Supplies Standard
• 10/100 LAN with SNMP and Embedded Web Server for Remote Control
• Video Proc Amp
• Closed Caption Support * Including SD to HD upconversion
• Video/Audio Test Signal Generator
Spezifikationen
Formate
• 525i
• 625i
• 1080i 50/59.94/60 Hz
• 1080psf 23.98/24 Hz
• 1035i 50/59.94/60 Hz
• 720p 50/59.94/60 Hz
Video Inputs und Outputs
• Dual SDI/HD-SDI, SMPTE 259/292/296
• HD component YPbPr/RGB, SMPTE-274
• SD component/composite/YC (S Video)
Video A/D, D/A
• 12 bits
• 2x oversampled (HD)
• 4x oversampled (SD)
Audio Inputs und Outputs
• 8 Channel Balanced, 25 pin D (Tascam pinout)
• 8 Channel AES (BNC)
• 8 Channel SDI/HD-SDI Embedded
Audio A/D, D/A
• 24 Bits, 48KhzSync
Audio levels
• +6dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital)
LAN
• 10/100 auto config, auto cable crossover
• Embedded Webserver, HTTP v1.1
• SNMP monitoring
RS-422 port
GPI
• 3x GPI input, TTL, isolated
• 3x GPI output, TTL, isolated
Physical
• 1 RU, 12 inches deep, convection cooled
Power
• 100-240 VAC, 25 watts
• Fully Redundant, diode isolated |